Home > Kits and Boards > Altera FPGA & SoC FPGA
Sort By:
Page of 1
Sodia – Cyclone V ST SoC Evaluation Board LVDS HSMC Daughter Card Embedded HSMC Daughter Card
Sodia – Cyclone V ST SoC Evaluation Board
Our Price: $980.00
1 in stock
LVDS HSMC Daughter Card
List Price: $520.00
Our Price: $520.00
1 in stock
Embedded HSMC Daughter Card
List Price: $580.00
Our Price: $580.00
1 in stock
Sodia board is a development platform for embedded system designs with Altera Cyclone V ST FPGA which allows hardware and software designers to quickly start designing in close-to-reality target application environment. Sodia is designed as a superset of Mpression Helio board (Cyclone V SoC Starter Kit) with software compatibility and most of the functions around Helio's HPS (Hardware Processor System) are inherited to Sodia board.

This LVDS
interface daughter card can easily provide you LVDS evaluation environment with
Altera development kit that support HSMC connection.

The Embedded Card is an extension card having PCI Express
Cable, Gigabit Ethernet and UART interfaces and SRAM and Flash memories, for
various FPGA development kits with High Speed Mezzanine Connectors (HSMCs)
defined by Altera.

Mpression Beryll Board for Cyclone V GX FPGA Mpression Hydra Car Infotainment FPGA Development Board Mpression Nitro Board
Mpression Beryll Board for Cyclone V GX FPGA
List Price: $348.00
Our Price: $348.00
(Out of Stock)
Mpression Hydra Car Infotainment FPGA Development Board
List Price: $1,980.00
Our Price: $1,980.00
1 in stock
Mpression Nitro Cyclone V GX FPGA I/O Board
List Price: $2,150.00
Our Price: $2,150.00
(Out of Stock)
The Mpression Beryll board is an evaluation board for the Altera Cyclone® V GX FPGA developed by Macnica. Users can evaluate the Cyclone V GX FPGA's various features before developing their own embedded systems. Additionally, there are variety of interfaces and expansion mezzanine connector on the Beryll board.

The Mpression Hydra board is an I/O companion board for Renesas's 2nd generation Car Infortainment SoC "R-Car H2".

It uses an Altera Cyclone® V GX FPGA – the Lowest cost & Lowest power 28nm FPGA with automotive temperature grade capability, creating an I/O function & image processing extensible platform of Car infotainment SoC for new interface or additional function development.

The Mpression Nitro board is an evaluation board for the Altera Cyclone® V GX FPGA which was developed by Macnica. The Mpression Nitro board has minimum components such as Altera Cyclone V GX FPGA in the center, DDR3 memories and clock ICs, and the three HSMC connectors. Users can be quickly prototyping FPGA-based multi-input/output applications in combination with various I/O daughter cards.


Mpression Borax Base Board with LCD Mpression Borax SOM Module (CYTBORAX-BA6C8-H1MRR) Mpression Borax SOM Module (CYTBORAX-BA5I7-H1MRR)
Mpression Borax Base Board with LCD
List Price: $239.00
Our Price: $239.00
(Out of Stock)
Mpression Borax SOM Module (CYTBORAX-BA6C8-H1MRR)
List Price: $249.00
Our Price: $249.00
(Out of Stock)
Mpression Borax SOM Module (CYTBORAX-BA5I7-H1MRR)
List Price: $410.00
Our Price: $410.00
1 in stock
The Borax Base Board with LCD has connectors to connect to a Borax SOM module for development. It also includes a touch-sensitive LCD display.

Borax SOM is
a system on module card integrating Altera®Cyclone® V SoC and necessary
memory, power and external interfaces on a very small size card.

Borax SOM is
a system on module card integrating Altera®Cyclone® V SoC and necessary
memory, power and external interfaces on a very small size card.

Mpression Borax SOM Module (CYTBORAX-MA5C8-H1MRZ) Mpression USB 3.0 Interface Card SV Mpression Odyssey MAX 10 FPGA and BLE Sensor Kit
Mpression Borax SOM Module (CYTBORAX-MA5C8-H1MRZ)
List Price: $199.00
Our Price: $199.00
3 in stock
Mpression USB 3.0 HSMC Interface Card SV
List Price: $650.00
Our Price: $650.00
(Out of Stock)
Mpression Odyssey MAX 10 FPGA and BLE Sensor Kit
List Price: $45.00
Our Price: $45.00
95 in stock

Borax SOM is
a system on module card integrating Altera®Cyclone® V SoC and necessary
memory, power and external interfaces on a very small size card.

The USB 3.0 Interface Board uses a Cypress USB3.0 controller
"EZ-USB ®FX3™" and an Altera's High-Speed Mezzanine Connector (HSMC),
allowing this board to work with various Altera development kits via HSMC. By
using this USB 3.0 Interface Board, customers can enable USB3.0 transmission in
their system.

The Mpression Odyssey MAX 10 FPGA evaluation kit is ideal
for doing proof-of-concept experiments using this Bluetooth SMART enabled
development platform. Includes the Odyssey Bluetooth SMART Sensor board to
provide USB and wireless connectivity plus additional sensors for UV and
ambient light, proximity, pulse rate, blood oximetry, temperature, and
humidity.

Macnica Americas Helio View Kit Mpression Helio View Upgrade Kit (HELIO-SOC-UPGRADE) Mpression Helio Evaluation Base Board (HELIO-SOC-EVAL)
Mpression Helio View Kit (HELIO-SOC-BUNDLE)
Our Price: $625.00
(Out of Stock)
Mpression Helio evaluation kit for the Altera Cyclone V Soc with touch-screen graphics and HDMI video. Includes the LCD and Helio boards preassembled, SD card with reference design, power and USB cables. (HELIO-SOC-BUNDLE) Helio View touch-screen LCD display with HDMI video input/output for the Helio Kit. Includes the LCD board, hardware to connect to Helio base board, and SD card with reference design.
Note: This item does not include a Helio Board. To purchase both the Helio SOC Board and the View Kit together, please purchase the HELIO-SOC-BUNDLE.
Macnica's Helio evaluation base board for the Altera Cyclone V SoC. Includes the Helio board, SD card, power and USB cables.