Home > Kits and Boards
Listings of development kits and boards by sub-category can be chosen at the left.

All Development Kits:
Sort By:
Page of 1
120MXSC Eval Kit- 120MP Color sensor (no lens) 120MXSI Eval Kit- 120MP RGB-NIR sensor (no lens) 120MXSM Eval Kit
The Canon 120MXSC Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to help accelerate development time. The Evaluation Kit features a camera with a pre-installed 120MXS 120 MP CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA (NDA required).
The Canon 120MXSI Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to help accelerate development time. The Evaluation Kit features a camera with a pre-installed 120MXS 120 MP CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA (NDA required).
The Canon 120MXSM Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to help accelerate development time. The Evaluation Kit features a camera with a pre-installed 120MXS 120 MP CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA (NDA required).
35MMFHDXSCA eval kit – 2MP low light sensor Color 35MMFHDXSMA eval kit – 2MP low light sensor Mono 3U5MGXSBAC Eval Kit - 5MP GS Color sensor (no lens)
The Canon 35MMFHDXSCA Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to accelerate development time. The Evaluation Kit features a 35MMFHDXSCA 2.7MP Color CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA (provided upon request with NDA).
* Requires a lens 		The Canon 35MMFHDXSMA Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to accelerate development time. The Evaluation Kit features a 35MMFHDXSMA 2.7MP Monochrome CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA (provided upon request with NDA).
* Requires a lens 		The Canon 3U5MGXSBAC Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to accelerate development time. The Evaluation Kit features a camera with a pre-installed 3U5MGXSBA 5 MP global shutter CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA (NDA required).
3U5MGXSBAI Eval Kit - 5MP GS RGB-NIR sensor (no lens) 3U5MGXSBAM Eval Kit - 5MP GS Mono sensor (no lens) Embedded HSMC Daughter Card
The Canon 3U5MGXSBAI Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to accelerate development time. The Evaluation Kit features a camera with a pre-installed 3U5MGXSBA 5 MP global shutter CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA (NDA required). The Canon 3U5MGXSBAM Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to accelerate development time. The Evaluation Kit features a camera with a pre-installed 3U5MGXSBA 5 MP global shutter CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA (NDA required).

The Embedded Card is an extension card having PCI Express
Cable, Gigabit Ethernet and UART interfaces and SRAM and Flash memories, for
various FPGA development kits with High Speed Mezzanine Connectors (HSMCs)
defined by Altera.

LVDS HSMC Daughter Card Mpression Beryll Board for Cyclone V GX FPGA Mpression Borax Base Board with LCD
LVDS HSMC Daughter Card
Our Price: $520.00

This LVDS
interface daughter card can easily provide you LVDS evaluation environment with
Altera development kit that support HSMC connection.

 		The Mpression Beryll board is an evaluation board for the Altera Cyclone® V GX FPGA developed by Macnica. Users can evaluate the Cyclone V GX FPGA's various features before developing their own embedded systems. Additionally, there are variety of interfaces and expansion mezzanine connector on the Beryll board. The Borax Base Board with LCD has connectors to connect to a Borax SOM module for development. It also includes a touch-sensitive LCD display.
Mpression Borax SOM Module (CYTBORAX-BA5I7-H1MRR) Mpression Borax SOM Module (CYTBORAX-BA6C8-H1MRR) Mpression Borax SOM Module (CYTBORAX-MA5C8-H1MRZ)

Borax SOM is
a system on module card integrating Altera®Cyclone® V SoC and necessary
memory, power and external interfaces on a very small size card.

Borax SOM is
a system on module card integrating Altera®Cyclone® V SoC and necessary
memory, power and external interfaces on a very small size card.

Borax SOM is
a system on module card integrating Altera®Cyclone® V SoC and necessary
memory, power and external interfaces on a very small size card.
Mpression Helio Evaluation Base Board (HELIO-SOC-EVAL) Macnica Americas Helio View Kit Mpression Helio View Upgrade Kit (HELIO-SOC-UPGRADE)
Macnica's Helio evaluation base board for the Altera Cyclone V SoC. Includes the Helio board, SD card, power and USB cables. Mpression Helio evaluation kit for the Altera Cyclone V Soc with touch-screen graphics and HDMI video. Includes the LCD and Helio boards preassembled, SD card with reference design, power and USB cables. (HELIO-SOC-BUNDLE) Helio View touch-screen LCD display with HDMI video input/output for the Helio Kit. Includes the LCD board, hardware to connect to Helio base board, and SD card with reference design.
Note: This item does not include a Helio Board. To purchase both the Helio SOC Board and the View Kit together, please purchase the HELIO-SOC-BUNDLE.
Mpression Hydra Car Infotainment FPGA Development Board Mpression Nitro Board Mpression USB 3.0 Interface Card SV

The Mpression Hydra board is an I/O companion board for Renesas's 2nd generation Car Infortainment SoC "R-Car H2".

It uses an Altera Cyclone® V GX FPGA – the Lowest cost & Lowest power 28nm FPGA with automotive temperature grade capability, creating an I/O function & image processing extensible platform of Car infotainment SoC for new interface or additional function development.

The Mpression Nitro board is an evaluation board for the Altera Cyclone® V GX FPGA which was developed by Macnica. The Mpression Nitro board has minimum components such as Altera Cyclone V GX FPGA in the center, DDR3 memories and clock ICs, and the three HSMC connectors. Users can be quickly prototyping FPGA-based multi-input/output applications in combination with various I/O daughter cards.

The USB 3.0 Interface Board uses a Cypress USB3.0 controller
"EZ-USB ®FX3™" and an Altera's High-Speed Mezzanine Connector (HSMC),
allowing this board to work with various Altera development kits via HSMC. By
using this USB 3.0 Interface Board, customers can enable USB3.0 transmission in
their system.